Dye-Sublimated Fabric Graphics: How They're Made, Fabric Types and How to Care for Them
Short answer: dye-sublimation uses heat and pressure to turn special dyes into a gas that bonds with polyester fabric, so the image becomes part of the fabric instead of sitting on top of it. The result is a bright, washable graphic that folds for shipping without cracking. That's why fabric is now the most common graphic on the trade show floor, from table covers to 20 ft backwalls.
How dye-sublimation works
- Print. The artwork is printed with dye-sublimation inks, usually onto transfer paper (or, with direct dye-sub, straight onto the fabric).
- Heat and press. The paper and white polyester fabric run together through a heated roller press. The heat turns the dye into a gas.
- Bond. The gas goes into the polyester fibers and sets as it cools. The image is now part of the fabric.
- Finish. The graphic is cut and sewn with whatever edge the display needs: a pillowcase sleeve, Velcro, or a silicone edge (SEG).
Because the dye is inside the fibers, there's no ink layer to crack, peel or scratch off, and the graphic can be folded and washed.
Why fabric took over trade show graphics
- Big and seamless. Fabric can be printed very wide and sewn together for huge graphics with no visible panel seams.
- Light and foldable. Fabric folds into a small bag, so it costs less to ship and in drayage than rigid panels.
- Stretches into shapes. Stretch fabric pulls tight over curved and sculpted frames for a 3D look.
- Washable. Dirty graphic? Wash it. Wrinkled? Steam it.
- Glows when backlit. Special fabrics let light pass through evenly for backlit displays.
For how fabric compares with rigid panels, banner film and vinyl, see Types of Trade Show Graphics.
Fabric types compared
| Fabric | What it is | Used on |
|---|---|---|
| Standard (frontlit) | A smooth polyester knit or poly twill | Table covers, banners, many backwalls |
| Blockout | A fabric with a dark or coated back that stops light from showing through | Non-lit SEG frames, double-sided signs |
| Backlit | A fabric that spreads light evenly, so LEDs inside the frame don't show as hot spots | Backlit displays |
| Stretch | A spandex-like fabric that pulls tight over curves | Tension fabric tube displays, stretch table covers, Xpressions displays |
What it is: A smooth polyester knit or poly twill
Used on: Table covers, banners, many backwalls
What it is: A fabric with a dark or coated back that stops light from showing through
Used on: Non-lit SEG frames, double-sided signs
What it is: A fabric that spreads light evenly, so LEDs inside the frame don't show as hot spots
Used on: Backlit displays
What it is: A spandex-like fabric that pulls tight over curves
Used on: Tension fabric tube displays, stretch table covers, Xpressions displays
What is SEG?
SEG stands for silicone edge graphic. A thin, flexible silicone strip is sewn around the edge of the fabric, and you press it into a channel in an aluminum frame. The fabric pulls tight and flat, with no visible hardware around the edge. SEG is used on many frame displays, light boxes and backlit walls.
Designing for fabric
- Colors. Dye-sub colors are bright, but they won't exactly match every brand color. Specify your logo colors as Pantone Coated references so we can get as close as possible. See our design tips.
- Resolution. 100–200 ppi at full size is plenty for fabric viewed from a few feet away. See our resolution guide.
- Edges. Keep text and logos inside the template's safe area. Sleeves, Velcro and SEG edges hide the outer edge of the artwork.
- Backlit graphics. Rich, saturated colors look best. Large light areas can look washed out when lit.
Fire rules for fabric
Many venues require fabrics in a booth to be flame retardant, usually to the NFPA 701 standard. Fire marshals can ask for proof on site. Ask for a flame-retardancy certificate when you order, keep a copy with your display, and don't add untreated fabric (like a home tablecloth) to your booth.
How to wash, steam and store fabric graphics
- Wash: machine wash in cold water with a mild detergent, then line dry. Don't use bleach.
- Wrinkles: most wrinkles fall out once the fabric is stretched on the frame. For stubborn ones, use a handheld steamer from the back.
- Store: fold loosely or roll, and keep it in its bag so it stays clean.
- Silicone edges: roll or fold SEG graphics gently so the silicone strip doesn't kink.
Popular fabric displays
Swipe to see more →
EcoTube 10ft Straight Tension Fabric Display
A stretch fabric graphic over a lightweight tube frame.
View the EcoTube
10 ft Economy Burst Display - Straight
A fabric pop-up with a wrinkle-resistant dye-sub graphic that stays on the frame.
View the Economy Burst
WaveLight LED 10ft Backlit Display
A 10 ft backlit display with LED lighting inside the frame behind a fabric graphic.
View the WaveLight
Trade Show Table Cover
A full color dye-sublimated table cover in fire-retardant poly twill.
View the table coverNeed a new graphic for a fabric display you already own? See our replacement graphics and replacement graphics buyer's guide.
Common questions
What is the difference between dye-sub and direct print?
Dye-sub dyes the fabric itself. Direct print on rigid materials puts ink on the surface. Each has its uses. See Types of Trade Show Graphics.
Can dye-sub fabric be used outdoors?
For a short event, yes. Long exposure to sun will fade it over time, so it isn't made for permanent outdoor signs.
Can a torn fabric graphic be repaired?
Small snags can sometimes be trimmed, but a tear can't be patched without showing. Order a replacement graphic for the same frame.
Need help?
Have questions about fabric for your display, or about setting up your artwork? We've been helping exhibitors with display graphics since 1998.
Sources: Digital Output coverage of SEG, blockout and backlit fabrics; venue fire regulations and NFPA 701 as published in exhibitor kits.