• Graphics
  • Types of Trade Show Graphics: Dye-Sub Fabric, Rigid Panels, Banner Film and Vinyl

    Nov 21, 2025
    Types of large format trade show graphics: dye-sub fabric, rigid UV print, banner stand film and vinyl banners

    When we started in this business, most trade show booths were built from rigid panels and laminated photo prints held on with magnets and velcro. Today, walk any show floor and most of what you see is printed fabric. Fabric made booths lighter, cheaper to ship and much easier to set up, and the industry moved to it fast.

    Fabric isn't the right answer for everything, though. The graphics on counters, kiosks and table top displays are still printed on rigid plastic, and banner stands and outdoor banners have their own materials. Here's how each type works and where it fits.

    The four types at a glance

    Graphic type Used on Best for
    Dye-sub fabric Backwalls, tension fabric and SEG displays, backlit displays, hanging signs, table covers Large seamless graphics that are light, foldable, washable and glare-free
    Rigid UV print Counter and kiosk panels, table top displays, signs Surfaces people touch and bump, which need to stay flat and wipe clean
    Banner stand film Retractable banner stands Graphics that roll up into a base hundreds of times and still hang flat
    Vinyl banners Hanging and outdoor banners with grommets or pole pockets Outdoor use and fully opaque prints at a low cost
    Dye-sub fabric

    Used on: backwalls, tension fabric and SEG displays, backlit displays, hanging signs, table covers

    Best for: large seamless graphics that are light, foldable, washable and glare-free

    Rigid UV print

    Used on: counter and kiosk panels, table top displays, signs

    Best for: surfaces people touch and bump, which need to stay flat and wipe clean

    Banner stand film

    Used on: retractable banner stands

    Best for: graphics that roll up into a base hundreds of times and still hang flat

    Vinyl banners

    Used on: hanging and outdoor banners with grommets or pole pockets

    Best for: outdoor use and fully opaque prints at a low cost

    1. Dye-sublimated fabric graphics

    Dye-sub fabric has taken over the trade show industry. Trade shows were one of the first markets to adopt digital fabric printing, and it's now the standard for backwalls, tension fabric displays and SEG (silicone edge graphic) frames. Industry research firm Smithers reports that dye-sub keeps gaining share in banners, flags and trade show graphics.

    How dye-sublimation works: CMYK dye inks printed on transfer paper, pressed onto polyester fabric on a heated rotary drum at about 400 degrees F, producing a vivid fabric print

    In dye-sublimation, the artwork is printed with dye inks onto transfer paper. The paper and a white polyester fabric then wrap together around a heated rotary drum, called a calender, at about 400°F. The heat turns the dye into a gas that bonds into the polyester fibers. Because the color is in the fabric instead of sitting on top of it, the print won't crack or peel. For more detail, see dye-sublimated fabrics.

    Why exhibitors love it:

    • Big and seamless. Fabric can be printed and sewn into one graphic that covers an entire 10 or 20 ft wall with no seams across your message.
    • Light and foldable. Fabric graphics fold into a small bag or case, which cuts shipping and drayage costs.
    • No glare. Fabric has a matte surface that looks good under show lighting and on camera.
    • Washable. Most fabric graphics can be machine washed in cold water and line dried, and wrinkles steam out.
    • Backlighting. Backlit fabric glows evenly when lit from behind, which is why backlit SEG displays have become so popular.

    The main fabric styles:

    • Pillowcase graphics slip over a tube frame and zip closed, like on our tension fabric tube displays and hanging signs.
    • SEG graphics have a thin silicone strip sewn around the edge that presses into a channel in an aluminum frame, so the fabric is pulled tight and the edges disappear.
    • Stretch fabric is used for fitted table covers and shaped displays.

    Fabric displays

    Swipe to see more →

    2. Rigid UV printed panels

    Fabric is great on a wall, but not on a counter. A counter or kiosk gets leaned on, bumped by carts and wiped down all day, so its graphics need to be flat and tough. That's where direct printing on rigid plastic comes in.

    With UV direct printing, a flatbed printer sprays ink straight onto a sheet of rigid material, and UV lamps cure the ink instantly. There's no laminate and no adhesive to peel. The finished panel is scratch and fade resistant and wipes clean. PVC board (often called Sintra) is the most common material because it's light, stiff and easy to cut, and it's commonly preferred for its fire rating.

    • Twist counters and kiosks use UV printed PVC panels that slide in between the shelves. Most use 3 mm PVC. Panels can be left blank in black or white, or fully printed. See our trade show counters and kiosks.
    • Table top displays like Breeze and ShowStyle use graphics printed directly onto plastic panels.
    • Signs and accent panels, like the graphic panel under a monitor on an XL Monitor Stand, are printed the same way.

    Counters and kiosks with rigid printed panels

    Swipe to see more →

    3. Banner stand film

    A retractable banner stand graphic rolls up into the base every time you pack it, so it needs a special material. Standard vinyl tends to curl at the edges after being rolled up again and again. Banner stand graphics are printed on a polyester/vinyl blend made to resist edge curling, with an opaque backing so the pole and lights behind the banner don't show through. It's also tear resistant, fade resistant and easy to clean. See our retractable banner stands.

    4. Vinyl banners

    Vinyl is still the go-to for outdoor banners and anything that needs to be fully opaque. It stands up to sun, wind and rain, and it's usually the lowest cost way to print a large banner. Vinyl banners are finished with grommets or pole pockets for hanging. Heavier outdoor vinyl is made for the elements, and lighter indoor vinyl gives the sharpest photo quality. See our hanging banners.

    What happened to pop-up panels?

    For years, pop-up displays used laminated graphic panels hung from the frame with magnetic bars. They looked great, but the panels were heavy, needed big cases and showed seams between every panel. The industry has moved to fabric, and today's pop-up frames take a single fabric graphic or an SEG graphic instead. If you still have an older panel display, replacement fabric options are usually the best upgrade. See our replacement graphics buyer's guide.

    Common questions

    Which type of graphic lasts the longest?

    Rigid UV printed panels and dye-sub fabric both hold up well for years of shows. Fabric survives folding and washing, and rigid panels survive bumps and cleaning. Banner stand graphics last longest when the stand is retracted carefully and stored in its case.

    Is fabric opaque?

    Not completely. Light can show through a single layer, which is why double-sided signs and some displays use a blockout or white backer layer. If you need a fully opaque graphic, rigid panels and vinyl block all light.

    Will the colors match between my fabric backwall and my counter panels?

    They'll be close, but fabric and rigid plastic take ink differently, so the same file can look slightly different on each. If an exact match matters, give us your Pantone colors and consider a hard copy proof.

    How long does printing take?

    Most printed graphics take 5 business days after proof approval, plus shipping time.

    What file setup do I need?

    Every product has a template with the exact size and bleed. Download yours from our design templates, keep photos at 100–200 ppi at actual size, and follow our file setup instructions.

    Not sure which graphic you need?

    We've been helping exhibitors choose trade show graphics since 1998. Browse our trade show graphics and replacement graphics. Tell us what display you have.

    Sources: Smithers, The Future of Dye Sublimation to 2029 (via WhatTheyThink); Specialty Fabrics Review; Digital Output, "The Rigid Route" and "Let Your Banner Shine."


    More from > Graphics