How to Choose a Trade Show Booth: Size, Display Type, Budget and What to Ask Before You Buy
Short answer: start with your booth size and how many shows you'll do each year. Then pick the display type that fits how you'll ship, set up and update it. Budget for the whole show, not just the display: industry surveys put the total cost of a show at roughly three times the cost of the floor space. Before you buy, ask about setup time, shipping weight, replacement graphics and warranty.
We've been helping exhibitors choose displays since 1998. These are the questions we walk every new customer through.
1. What size is your booth?
Your booth space sets the size of the display and the rules you have to follow.
| Booth | Typical display | Key rule |
|---|---|---|
| Table top | A 6 or 8 ft table with a table top display | Check that the show provides a table |
| 10x10 inline | A 10 ft backwall, plus a counter or kiosk | Backwalls usually max out at 8 ft. Anything over 4 ft tall belongs in the back half of the booth |
| 10x20 inline | A 20 ft backwall or two 10 ft walls | Same height rules as a 10x10 |
| 20x20 island or peninsula | A modular or custom exhibit, often with a hanging sign | Height limits are higher, usually 16–20 ft, and vary by show |
Typical display: A 6 or 8 ft table with a table top display
Key rule: Check that the show provides a table
Typical display: A 10 ft backwall, plus a counter or kiosk
Key rule: Backwalls usually max out at 8 ft. Anything over 4 ft tall belongs in the back half of the booth
Typical display: A 20 ft backwall or two 10 ft walls
Key rule: Same height rules as a 10x10
Typical display: A modular or custom exhibit, often with a hanging sign
Key rule: Height limits are higher, usually 16–20 ft, and vary by show
Height rules come from the IAEE guidelines most U.S. shows follow, but every show sets its own. Check the display rules in your exhibitor kit before you buy anything tall.
2. How often will you exhibit?
- One or two shows a year: a lightweight display with a soft or hard case usually makes the most sense. Value matters more than long-term durability.
- Several shows a year: spend more on hardware that holds up to repeated shipping and setup, and a hard case that protects it. A display that ships light saves money every time.
- Different booth sizes: look at modular systems or banner walls that can be rearranged for a 10x10 one month and a 10x20 the next.
3. Budget for the whole show, not just the display
The display is only one part of what a show costs. Surveys from CEIR and the major show contractors consistently find that floor space is the largest single expense, and that the full cost of a show runs about three times the space rental once you add the exhibit, shipping, drayage, show services and travel.
- Shipping and drayage are billed by weight. A lighter display saves money at every show. See why some cases now cost more to ship.
- Show services like power, carpet and labor cost much more if you order late. See Power at Trade Shows.
- Graphics will change. Plan on replacement graphics when your message, logo or products change, instead of a whole new display.
4. Which type of display fits you?
Common 10 ft display types compared
| Display type | Setup | Best for |
|---|---|---|
| Banner wall | Fastest. Three stands pull up in minutes | Tight budgets and flexible layouts |
| Tension fabric (tube) | Snap the tubes together and pull on the fabric | Light, low cost shipping and a seamless look |
| Fabric pop-up (Burst) | Open the frame. The graphic stays attached | The quickest full backwall setup |
| Backlit | Frame plus a fabric graphic, with lights inside | Standing out on a busy floor |
| Modular (Exhibit Line) | Longer, but reconfigurable | Frequent exhibitors who want a custom look |
Setup: Fastest. Three stands pull up in minutes
Best for: Tight budgets and flexible layouts
Setup: Snap the tubes together and pull on the fabric
Best for: Light, low cost shipping and a seamless look
Setup: Open the frame. The graphic stays attached
Best for: The quickest full backwall setup
Setup: Frame plus a fabric graphic, with lights inside
Best for: Standing out on a busy floor
Setup: Longer, but reconfigurable
Best for: Frequent exhibitors who want a custom look
For a closer comparison within each type, see our buyer's guides for tension fabric displays, 10x10 backlit displays, pop-up displays and fabric system displays.
5. Don't forget the rest of the booth
A backwall alone is just a backdrop. The pieces in front of it are where conversations happen:
- A counter or kiosk for demos and a place to write
- A branded table cover if the show provides a table
- LED lights so the graphic doesn't look flat under hall lighting
- Flooring if carpet isn't included
- A hard shipping case that matches how you'll ship
Questions to ask before you buy
- Can one person set it up? How long does it take, and are tools needed?
- What does it weigh packed? That number drives your shipping and drayage at every show.
- What's the warranty on the hardware, and separately on the graphics?
- Can I order replacement graphics later? And how long do they take?
- Is a template available? So your designer can build the artwork correctly.
- Who do I call if something goes wrong at the show? A real person with a direct phone number matters most when you're on the show floor.
Popular starting points
Swipe to see more →
EcoTube 10ft Straight Tension Fabric Display
A lightweight 10 ft tension fabric backwall that one person can set up.
View the EcoTube
10 ft Streamline XL Media Kit
An EcoTube 10 ft backwall, two LED arm lights and an XL Monitor Stand, all packed in one hard shipping case.
View the kit
Penta Retractable Banner Wall
Three Penta banner stands that line up as one 10 ft backwall, or stand alone at smaller events.
View the banner wall
MultiMedia Twist Kiosk
Our best-selling monitor kiosk, built in Harrisonburg, with hidden storage and a 40" counter.
View the kioskBrowse all 10x10 booth kits, or start from your booth size: 10x10, 10x20 or 20x20.
Common questions
Should I buy a used display?
It can save money, but check that parts and replacement graphics are still available for that model, and plan on a new graphic printed for your brand.
Should I buy or rent a trade show display?
If you exhibit more than once or twice a year, buying usually costs less over time, especially with a display that lets you change the graphics. Renting can make sense for a one-time show or a large island.
Can I grow from a 10x10 to a 10x20 later?
Often, yes. Many 10 ft backwalls can be paired with a second matching wall, or extended with banner stands and a counter. Ask us which lines expand before you buy.
Need help?
Tell us your booth size, how many shows you do and how you plan to ship, and we'll suggest a few displays that fit.
Sources: IAEE Guidelines for Display Rules and Regulations as published in show exhibitor kits; CEIR exhibitor spending research; GES exhibitor budgeting guide (total show cost about three times space cost).