• Displays
  • Trade Show Tips
  • Trade Show Booth Lighting: How to Choose and Aim Your Display Lights

    Dec 19, 2025
    Trade show booth lighting: two LED arm lights evenly lighting the top of a 10 ft backwall graphic

    Walk any exhibit hall and you can pick out the lit booths from 50 feet away. Convention centers light the floor from ceilings 30 feet or more overhead, so the light that reaches your backwall is often flat and uneven. A couple of well-aimed lights, or a backlit graphic, can be the difference between a booth people notice and one they walk past.

    Here's what we recommend after outfitting booths since 1998: how to choose lights, how to aim them, and what the show rules allow.

    Three ways to light a trade show booth

    • Arm lights. LED lights on an arm that clamp to the top of your display frame and shine down on the graphic. This is the most common and most flexible option, and it works on almost any backwall.
    • Backlit displays. The light is inside the frame and shines through a fabric graphic, like a giant light box. The whole graphic glows evenly, with no arms or glare. See our backlit trade show displays.
    • Accent lighting. Smaller lights that highlight one piece of the booth: a light on a banner stand, downlights inside a showcase kiosk, or a lit counter. Accent lights are a good way to draw the eye to a product.

    How to choose display lights

    • Go LED. LED lights stay cool to the touch, so you can pack them up right after the show. They use very little power, so they rarely push you into a bigger electrical order, and they last for years.
    • Pick a neutral white. A color temperature around 4000K to 5000K (often called neutral or natural white) shows your graphic's colors the way they were designed. Warm lights turn whites yellow, and very cool lights can make a graphic look blue.
    • Look for a high CRI. CRI (color rendering index) measures how accurately a light shows color. A CRI of 90 or higher keeps your brand colors true.
    • Match the mount to your frame. Most arm lights clamp to a pole or a flat edge. Pop-up displays usually need a special scissor mount, and banner stands need a clip that fits the support pole.
    • Plan on two lights per 10 ft wall. For a typical 10 ft backwall, two arm lights spaced apart give an even wash across the graphic. A 20 ft wall usually needs four.

    How to aim your lights

    How to aim trade show arm lights: an even wash from two lights, versus one hot spot or lights pointed into visitors' eyes

    • Light the top of the graphic. Your logo and headline are up high, where people see them over the crowd. Aim the light there.
    • Overlap the beams. Space the lights so their light overlaps a little in the middle. That gets rid of dark gaps and bright hot spots.
    • Never aim at the aisle. A light pointed out at visitors is blinding, and most shows require lights to shine into your own booth only.
    • Test it before the show. Set up the display with the lights on in a dim room. It's much easier to adjust them in your office than on the show floor.

    Which light fits my display?

    Start with the type of display you have, then choose a light that's made to mount on it.

    Display type What to look for Lights that fit
    Pop-up displays A scissor mount that attaches to the pop-up frame LED High-Intensity Package (2-Pack), which includes scissor adapters
    Retractable banner stands A clip that fits the banner stand's vertical support pole Value LED Banner Stand Light
    EcoTube and Economy Burst displays A light designed for the tube frame White LED Light
    Frames with poles or flat edges (truss, modular and fabric frame displays) A clamp that fits the pole or edge size PAL25XL LED Light Kit, LED L4000C Set of 2 Lights, Expolinc LED Set of 2 Lights
    Pop-up displays

    Look for a scissor mount that attaches to the pop-up frame.

    LED High-Intensity Package (2-Pack), which includes scissor adapters

    Retractable banner stands

    Look for a clip that fits the banner stand's vertical support pole.

    Value LED Banner Stand Light

    EcoTube and Economy Burst displays

    Look for a light designed for the tube frame.

    White LED Light

    Frames with poles or flat edges

    Truss, modular and fabric frame displays. Look for a clamp that fits the pole or edge size.

    Not sure which light fits your display? Call 540-438-9933 with the name of your display and we'll check it for you.

    Our LED display lights

    Swipe to see more →

    See all of our LED trade show lights.

    Backlit displays: light built in

    A backlit display puts LED lighting inside the frame, behind a fabric graphic. The whole wall glows evenly, there are no arms to adjust, and nothing shines toward the aisle. Backlit displays need graphics printed for backlighting, which are made to look right with the light behind them.

    Swipe to see more →

    See all of our backlit trade show displays.

    Show rules for booth lighting

    Every show has its own rules, so check the electrical and display rules in your exhibitor services kit. These are the rules we see most often:

    • Keep your light in your booth. Lights must point into your own space and can't extend past your booth or shine onto other exhibits.
    • Use UL-listed equipment. Light fixtures, cords and power strips usually have to be UL listed. Household cube taps and ungrounded cords are commonly prohibited.
    • Use heavy-duty extension cords. Many venues require grounded, 3-wire, 12-gauge UL-listed extension cords, run along the back of your booth. You can't run cords under the carpet yourself.
    • No strobes or lasers. Flashing, strobing and laser lights are often banned or need approval.
    • You can usually install your own lights. At many venues a full-time employee of your company can set up the lights that came with your display. If you hire an outside installer, or the lights are rented, the show's electricians may have to install them.
    • Order power for your lights. Lights need an outlet in your booth, and power isn't included with booth space. Order it before the discount deadline in your exhibitor kit.

    Common questions

    Can I use display lights in my office or showroom?

    Yes. LED arm lights work anywhere you have an outlet, so you can light your display in a lobby or showroom between shows.

    How do I pack lights so they don't break?

    Let them cool, coil the cords loosely, and pack each light in its own padded pouch or a separate box, away from heavy frame parts.

    Should I light a table top display?

    Yes, if you can. A small clamp light makes a table top display stand out, especially in a dim hotel ballroom.

    Can one outlet power all my lights?

    Usually. LED lights use very little power, so a small outlet often covers your lights and a monitor. See Power at Trade Shows to add it up.

    Need help lighting your booth?

    We've been helping exhibitors light their displays since 1998. Browse our LED trade show lights and backlit displays.

    Show rules vary by venue and change often. Sources: GES exhibitor lighting policy and electrical service checklists; Pennsylvania Convention Center electrical safety standards and exhibitor FAQs; Informa show standards.


    More from > Displays Trade Show Tips